RIPCORD “Deep Freq” Guitar Amp

Available for purchase in store or over the phone

The RIPCORD “Deep Freq” is the guitar version of the “Bass Freq”.

A manageable sized 100w head, packed with all the vintage tones you could possibly want! While the Clean Freq and Lead Freq guitar amps are breaking the molds of what a guitar amp can be, the Deep Freq has it’s feet firmly rooted in traditional vintage tones that would normally take several amps to really compare, but now can be found in one unique package!

This amp is essentially the best of our favorite amps, with modifications and redesigns to make it an extremely flexible and dynamic tone machine!

A 100w back end that booms out a specifically designed preamp that outperforms other amps by bringing tone shaping to a new level with a variable midrange circuit designed to scoop out at the turn of a knob to help accentuate the shimmering highs and those tight/deep lows!

The smooth and clean headroom of this amp will keep your rhythm on point. A 3-position mini toggle “character switch” will give you “deep/neutral/bright” tone options, effectively making this amp your greatest all-purpose tone machine!


All amplifiers include:

  • Hand-wired All Tube Design (diode rectifier) built in NEW JERSEY, USA
  • 100w RMS Output via 4X6L6’s
  • 8 and 4 ohm Output Taps
  • Presence Control
  • 3-Way Power/Off/Standby Switch
  • Slipcover
  • Light Up Logo with Multiple LED Color Configurations (Remote Included)
  • Power Tube Cooling Fan
  • Power Cord Wrapping Hooks
  • Front & Rear Perforated Metal Grills (allows for consistent airflow and gives you full view of the external components, there’s no guessing if it’s a Tube Amp... take a look for yourself!)
  • Post Phase Inverter “Master”**

Weight:
35lbs

Dimensions:
Depth: 11”
Width: 18-1/2”
Height: 10”

 

**Processing fee applies if paying by credit card.

*The PPIM is a feature that not only acts as a Master, but also as an Attenuator of the signal prior to it entering the power tubes. What this means is that you can mimic the overall output of any wattage amp by setting this control to your desired output level. This linear control acts like this: at full, your amp is at full 100w power, at 12 O’clock the output is 50w, and so on and so forth and anywhere in between! And to top it off, as opposed to Hot Plates and Attenuator Boxes which hurt your output tubes and output transformer by making them work overtime, the PPIM saves the life of those components by attenuating the signal before it gets there! The O.T. and Output Tubes are now working UNDER SPEC! No more power tubes prematurely cooked to death thanks to a Hot Plate!